ISO 5667-1 Technical Corrigendum 1-1996 水质采样第1部分:采样方案设计指南技术勘误1
作者:标准资料网 时间:2024-05-15 13:19:51 浏览:9250
来源:标准资料网
【英文标准名称】:Waterquality-Sampling-Part1:Guidanceonthedesignofsamplingprogrammes;TechnicalCorrigendum1
【原文标准名称】:水质采样第1部分:采样方案设计指南技术勘误1
【标准号】:ISO5667-1TechnicalCorrigendum1-1996
【标准状态】:作废
【国别】:国际
【发布日期】:1996-02
【实施或试行日期】:
【发布单位】:国际标准化组织(ISO)
【起草单位】:ISO/TC147
【标准类型】:()
【标准水平】:()
【中文主题词】:抽样方法;化学分析和试验;水质试验;水污染;侧壁试验器;试样制备;取样方法;水质;试验程序
【英文主题词】:
【摘要】:Correctsanexpressioninsubclause16.4.
【中国标准分类号】:Z16
【国际标准分类号】:13_060_45
【页数】:1P;A4
【正文语种】:英语
基本信息
标准名称: | 热轧钢板表面质量的一般要求 |
英文名称: | General requirement of surface finish for hot rolled steel plates |
中标分类: |
冶金 >>
钢铁产品 >>
钢板、钢带 |
ICS分类: |
冶金 >>
钢铁产品 >>
扁平钢和半成品
|
替代情况: | 被GB/T 14977-2008代替 |
发布部门: | 发布单位: |
发布日期: | 1994-04-05 |
实施日期: | 1995-01-01 |
首发日期: | 1994-04-05 |
作废日期: | 2009-10-01 |
主管部门: | 中国钢铁工业协会 |
提出单位: | 中华人民共和国冶金工业部 |
归口单位: | 冶金工业部信息标准研究院 |
起草单位: | 冶金部信息标准研究总院 |
起草人: | 黄东、邓濂献 |
出版社: | 中国标准出版社 |
出版日期: | 1995-01-01 |
页数: | 7页 |
适用范围
本标准规定了热轧钢板表面缺陷的深度,影响面积、限度、修整的要求及钢板厚度的限度。 本标准适用于厚度为>4mm~200mm的热轧钢板。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 钢铁产品 钢板 钢带 冶金 钢铁产品 扁平钢和半成品
MIL-PRF-32225, PERFORMANCE SPECIFICATION, HEAT SENSOR, ADVANCED FIRE AND SMOKE SENSOR SYSTEM (AFSSS) (25 OCT 2006)., This specification covers the performance requirements for spot-type heat sensors (see 6.8.9 and 6.8.10) and their universal bases and junction boxes, which are components of an overall Advanced Fire and Smoke Sensor System (AFSSS) for use on naval ships. These heat sensors, universal bases, and junction boxes may be of commercial-off-the-shelf (COTS) design, but must be rugged (see 6.8.19) enough to meet all of the requirements of this performance specification and the rigors of Navy shipboard service. Performance requirements for the other associated AFSSS components (e.g., ionization (see 6.8.11) and photoelectric (see 6.8.14) smoke sensors (see 6.8.23), flame detectors (see 6.8.7), Flame Detector Zone Modules (FDZM) (see 6.8.8), Switch Closure Zone Modules (SCZM) (see 6.8.25), isolators (see 6.8.12), and alarm panel (see 6.8.2) are contained in their respective AFSSS specifications.